If Your Car Is Not Spitting Fire, Watch This Tutorial And It Will Start Immediately!

Spitting Fire

 

You might have seen numerous videos showing fire spitting vehicles, but this one is quite different. In fact, the vehicle in the video spits fire, but the recording is actually a tutorial for demonstrating how to build your own system for spitting fire! The boys from Chaotic Customs are always here at your disposal at any time just to show you how to install the kit for

The boys from Chaotic Customs are always here at your disposal at any time just to show you how to install the kit for the flame thrower. As a model car for this presentation, they use a 1965 Thunderbird.

Now, let`s take a look at the parts of the system. You will need a main module, coil, spark plugs, push button switch, bunions, wire and wire connectors, and spark plug wires. Firstly, step mounting the coils and put them in the trunk. Next, drill a hole for the plug wire in order to reach the exhaust pipe and then mount the spark plugs. It has 2 ways to do it,  with or without welding. Then, they will show you how to connect the coil with the spark plug wire. The next step is mounting the module. They will show you a diagram. At the very end of the recording, you will get more tips and you will see the whole procedure itself.

It has 2 ways to do it,  with or without welding. Then, they will show you how to connect the coil with the spark plug wire. The next step is mounting the module. They will show you a diagram. At the very end of the recording, you will get more tips and you will see the whole procedure itself.

Watch the video and try it. Share the experience with us!